Popfasteners, Rivets & Eyelets
Please scroll down for our range.

UK Sewing Services recommends that suitability tests are carried out on all items prior to production.

If the item you require is not listed below, try here:

If the item you require is listed below and you would like a sample please use :

All prices shown on this site are in GBP, pounds sterling. Click here for currency rates.

Round plastic pop fastener (GBP per 1000 sets)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

This fastener must be set using a press. Please see KPR1  (below).
n/a = Not currently available.

Product code='Product code'+Colour+quantity (minimum 020P & 021P 2000sets, 022P 1000 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP,  pounds sterling.

Snap-tape (Poppa / Duvet tape)

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)

	(GBP  per pack)
50m lap-folded in carton	69.37
25m board	38.28
10m board	18.00

This 100% polyester tape is a full 25mm wide. The fasteners are spaced at 100mm(4") intervals.
Currently available in natural white only

Product code = PF25MMTAPE+quantity (minimum 1 pack)
Order form
(Please load the order form once only)

All prices shown on this site are in GBP pounds sterling

10mm square plastic popfastener

(Image as an indication of style only, actual design may vary)

The 4 part set should be placed using our KPR1(below).
Product code=WHPSNP+2partset/4partset+quantity)
Order form
(Please load the order form once only)
(Currently only white available.) 
All prices shown on this site are in GBP pounds sterling
*Price recently drastically reduced !

See next item for clear plastic sew-on popfasteners.

6mm Clear plastic sew-on popfastener

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Product code = POPSEWONCLR+quantity (minimum 300 sets)

Order form
(Please load the order form once only)
All prices shown on this site are in GBP, pounds sterling.

Popfasteners 10mm prong ring sets (recommended for stretch fabrics)
This is a brass based nickel free rustless stud.

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)



Available in Silver(Nickel free), Bronze (Gun metal) Black, White, Light Pink, Light Blue & Red.

Product code 9mm = 031B+Style+pack+quantity
(This item is normally used on baby-gro's etc, minimum 1000 sets)
Product code 10mm = 032B+Style+pack+quantity
(Normally seen on Warehouse coats, boilersuits & stretch fabrics, minimum 1000pk, 100pk)
(This stud may also be purchased in 1000 individual component parts).
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling
Please see KPR1 below for stud press

Popfasteners 12mm cap sets in 100 or 1000 pack (Brass-based rustless)
(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)

Available in Black, Black nickel, White, Nickel free silver finish, Light Pink & Light Blue.

Product code=032B+Style+pack+quantity (minimum 1000 or 100 pack)
This stud may be purchased in 1000 individual component parts. Please ask for details)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

Please see KPR1 below for stud press

Poppa-pliers for 10mm & 12mm above (GBP each) minimum 1 pair

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)
 

Product code= PFP+quantity
(You cannot set our 9mm 031B with this)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

Back to Top

Heavy Duty Ring spring (GBP per pack)

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images in your browser is turned off)

B = brass based  S= Steel based.
051(large) is sold as standard with a 15mm cap in Nickel(silver, "S"+"B") Bronze("S"+"B") or Gilt(gold, "S" only);
050(medium) is sold as standard with 13mm cap in Nickel(silver) Bronze or Gilt(gold)

Product code="Article"+finish+packsize
(minimum 100 / 1000 pack )
This stud may be purchased in 1000 individual component parts. Please ask for details)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling
Please see KPR1 below for stud press

Jean Buttons (GBP per 1000)

Effect	Antique Brass	Copper	Zinc	Pewter	Antique Brass
14mm	Product code JB14HQAB	Product code  JB14HQCP	Product code  JB14HQZN	Product code JB14HQPW	Product code  JB14PLAB
17mm	Product code JB17HQAB	Product code  JB17HQCP	Product code JB17HQZN	Product code JB17HQPW	Product code  JB17PLAB
Effect	Antique Brass	Bronze	Pewter	Nickel	Back
14mm	Product code  JB14WSAB	Product code  JB14WSBZ	Product code JB14PLPW	Product code JB14PLNK	Aluminium  or Brass/Nickel nails
17mm	Product code  JB17WSAB	Product code  JB17WSBZ	Product code JB17PLPW	Product code JB17PLNK
		GBP per 1000 sets	Aluminum nail (nickel free)	Brass nail (nickel capped)
		14mm	30.52	37.55
		17mm	34.65	41.68

Product code = (as above) + quantity (minimum 1000 sets)
Please ask about our bulk order discounts
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling
Please see KPR1 below for stud press

Nail head stud (GBP per pack)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Availability:  5mm..Gilt, Nickel & Tin (mat silver), 6mm,8mm,9mm & 12mm.. Gilt & Nickel
(12mm curently out of stock)

Product code =PFNAILHEAD+"size"+"finish"+packsize
(minimum 1 pack)
Order form
(Please load the order form once only)

Decorative Star  (GBP per pack)

(Please click on the thumbnail image for a larger version)
(Microsoft Internet Explorer users should ensure that auto-resizing of images is turned off)

Product code ="DECStar9+finish+packsize
(minimum 1 pack)
Order form
(Please load the order form once only)

Lacing hooks (GBP per pack)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Steel-based lacing hooks with integral rivet are available in the following finishes
Product codes:
Gilt  = SKTCGLT+ quantity; Nickel = SKTCLG+ quantity ; 
Bronze = SKTCSM+quantity, 
Order form
(Please load the order form once only)
This product must be set on a press.

Pyramid "Dog-Collar" stud ( GBP per pack)

(Please click on the thumbnail image for a larger version)
(You should usensure that auto-resizing of images in your browser is turned off)

Steel-based silver "Dog-collar" style Pyramid stud.
Order form
(Please load the order form once only)

Product code=PYSTD10 (minimum 1 pack)

Retaining washers are sometimes used with the above. These are available in nickel or gilt finish as follows:

 Product code=RIVWASH="finish"+"quantity" (minimum 1 pack)

Order form
(Please load the order form once only)
Please see KPR1 below for stud press

Jean / reinforcing rivets ( GBP per 1000 sets, including nail, not shown)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

This rivet is traditionally used as reinforcing on jeans, however it is now used on many applications where a strong decorative reinforcing is needed. It is normally placed using our KPR1 press below. It is a two part set (nail not shown) and requires two closing dies.

Product code = 010B(nipple)or 011B(inverted nipple)+style(please see above)+quantity (minimum 1000 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP, pounds sterling.

Dome cap rivet set (GBP per pack)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

This versatile 9mm cap rivet set is used in many applications where strength and looks are important. 
It is a two part product, consisting of cap & nail. It requires two closing dies and will need to set on a press.
One side will finish with a slightly domed cap, the other flat.
There are two lengths of nail 5mm & 7mm to accommodate varying stock thicknesses.

Product code = PF012B+"finish" + "nail length"+ "quantity"  (minimum one pack)
Order form
(Please load the order form once only)

Tubular Steel-based Rivets ( GBP per 1000)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Sizes = Tube diameter x length x cap diameter ( GBP per 1000)

Product code = RVTTUBSTL+ size + finish (minimum 1000pcs) (n/a = not currently available)

Order form
(Please load the order form once only)

Retaining washers are sometimes used with the above. These are available in nickel or gilt finish as follows:

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

 Product code=RIVWASH="finish"+"quantity" (minimum 1 pack)

Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

Double tubular rivets (GBP per 1000 parts)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)
 
The number indicates the approximate diameter. C = Cap, CP = Capped post and P = Post. 

A cap (C) and a capped-post (CP) are used for similar appearance on each side of the item. 
A cap (C) and post (P) should be used when the rear view is not required to match the front. 

The following combinations are possible; 
9C(cap) or 11C(cap) with any of the following;  9CP(capped post), 11CP(capped post), 8P(post) or 10P(post)9CP(capped post) or
11CP(capped post) with any of the following; 9C(cap) or  11C(cap). 

These double tubular rivets require two cutting dies and two closing dies.
 They should be placed using our  KPR1  press below.

Product code=DTR+"colour"+" Part-code " + quantity.
Order form
(Please load the order form once only)

All prices shown on this site are in GBP,  pounds sterling.

Click here for info on
 

Eyelets
Please scroll down for our range.

UK Sewing Services recommends that suitability tests are carried out on all items prior to production.

If the item you require is not listed below, try here:

If the item you require is listed below and you would like a sample please use :

All prices shown on this site are in GBP, pounds sterling. Click here for currency rates.

Rustless eyelet 4mm internal, 7mm overall external (GBP per 1000 parts)
(This item is self-piercing on certain fabrics/jobs):

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Product code=AE4/7+colour+quantity (minimum 1000 parts) Also see  "SP500"  below
Finishes currently available: 
Nickel(silver), Gilt(gold), Black, White& Ivory.  Lead time approx 21 days for other colours.

Order form
(Please load the order form once only)
Please see KPR1 press below for eyelet press.

Eyelets 500 series(5mm) & 700 series(7mm) (Brass based, GBP per 1000 sets)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

These items will probably need two diesets, one for pre-cutting holes, the other for placing. 
In some circumstances it is possible to use a single dieset to both cut & place, 
however this is dependant on the actual job.
Product code=BBEYE+"finish"+quantity (minimum 1000 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

We now stock and supply hand tool sets for our eyelets, 500 series, 700 series as below. Also 25B & 27B see below.

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

 Self piercing SP500  (5mm) Eyelet (Brass based, GBP per 1000 sets)

This is a self piercing eyelet. 
In most circumstances it is possible to use a single dieset to place an "SP" item. It is, however, job-dependant.

Product code=SPBBEYE+"finish"+quantity (minimum 1000 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

All specifications are supplied for guidance only.
Please see KPR1 below for eyelet press

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

	Brass	Nickel (Silver)	Internal Barrel diameter	Flange Diameter	Length
Eyelets	57.00 / 1000	61.00 / 1000	7.5mm	14.25mm	5.8mm
T/o washers	34.75 / 1000	37.62 / 1000		14mm
1000 Sets	91.75 / 1000	98.62 / 1000
5000 Sets	87.16 / 1000	93.69 / 1000
10000 Sets	82.58 / 1000	88.76 / 1000

This item will probably need two diesets, one for pre-cutting holes, the other for placing. 
In some circumstances it is possible to use a single dieset to both cut & place, 
however this is dependant on the actual job.
Product code=EYE22B+"EYE"or "WASHER" or "SET" + FINISH+QUANTITY
(minimum 1000 components)
Order form
(Please load the order form once only)

Sail Eyelet & turn-over washer(025B) (see also 022, 027 & 030 below) (GBP per 1000 sets)
This is a brass based nickel plated eyelet. It is commonly used on sails, tarpaulins, signs etc.
It is available off the shelf in Nickel finish and to order in other finishes

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

	Nickel (Silver) & Blacked	Brass	Internal Barrel diameter	Flange Diameter	Length
Eyelets	84.68 / 1000	82.28 / 1000	10.29mm	19.5mm	6.925mm
T/o washers	37.81 / 1000	34.81 / 1000		20mm
1000 Sets	122.49 / 1000	117.09 / 1000
5000 Sets	103.69 / 1000	101.75 / 1000
10000 Sets	98.62 / 1000	92.16 / 1000

Sail eyelet & washer(27B) (GBP per 1000 sets)(see also 022 & 025 above & 030 below)
This is a brass eyelet. It is commonly used on sails, tarpaulins, signs etc.

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

This item will probably need two diesets, one for pre-cutting holes, the other for placing. 
In some circumstances it is possible to use a single dieset to both cut & place, 
however this is dependant on the actual job.
Product code=EYE27B+"EYE"or "WASHER" or "SET" + FINISH+QUANTITY
(minimum 1000 components)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

We now stock hand tools for our 27B eyelets (Other sizes to order).
(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Please see KPR1 below for our table-based eyelet press.

Sail eyelet & washer(030B) (GBP per 1000 sets) (See also 27B above)
This is a brass based nickel plated eyelet. It is commonly used on sails, tarpaulins, signs etc.

This item will probably need two diesets, one for pre-cutting holes, the other for placing. 
In some circumstances it is possible to use a single dieset to both cut & place, 
however this is dependant on the actual job.
Product code=EYE030B+"EYE"or "WASHER" or "SET" + FINISH+QUANTITY
(minimum 1000 components)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling

Curtain pole eyelets (40mm)

This item will need two diesets, one for pre-cutting holes, the other for placing. 
Product code=EYECURT40MM" + "FINISH" + "QUANTITY" (minimum 50 sets)
Order form
(Please load the order form once only)
All prices shown on this site are in GBP pounds sterling
Please see KPF2 below for eyelet press

Plastic Eyelets ( Machine & hand setting)

(Please click on the thumbnail image for a larger version)
(Users should ensure that auto-resizing of images is turned off)

Product code= "Item"+colour+quantity
(minimum 1 pack, then multiples of 1 pack)
Order form
(Please load the order form once only)

KPR1
(Foot operated ratchet press) : Available to Purchase or Hire


KPR1 is a foot operated ratchet press. It is supplied complete on a stand which incorporates two side trays for stud part storage.  It is designed to attach most press fasteners, rivets eyelets, jeans buttons etc. It is extremely versatile and can be used for placing piercing trim on textiles or paper and card. We can supply a full range of dies, which are made in the UK of hardened & tempered steel to fit our own ranges or your existing studs or eyelets.

It's fully floating adjustable base allows precision horizontal alignment and exact vertical locking in order to obtain the optimum pressure setting. Once up to speed KPR1 is rated at approx. 240 studs and hour, thus eliminating the need for expensive pneumatic or electric machinery.

(Please click on the thumbnail image for a larger version)
(You should ensure that auto-resizing of images is turned off)

All new machines are sold with a 6 months back to base warranty, but anyone who has seen our KPR1 will know that it's solid construction & simple internal design will facilitate many years of faithful, trouble-free service.